enru

TECHNOELAST FOUNDATION ALFA

Technoelast FOUNDATION ALPHA is a rolled hydro-gas-insulating welded bitumen-polymer material.

Technoelast FOUNDATION ALPHA is obtained by double-sided application of a bitumen-polymer binder consisting of bitumen, SBS (styrene-butadiene-styrene) polymer modifier and mineral filler on a polyester base, duplicated with metal foil, followed by application of protective coatings on both sides of the web. layers. A polymer film is used as protective layers.

Materials laid as a bottom layer
Materials laid as a top layer
Flexibility on the timber: -20 ° С
Warranty certificate
Waterproof 0.2 MPa
Durability - over 80 years
Package appearance:
Upper side:
Membrane
Down side:
Membrane with logo
Physical and mechanical characteristics
Weight 1 m2, kg, (±0.25 kg)
EPM 4,0
Nail shank tear resistance, H, not less than
EPM 200
Breaking strength in the longitudinal / transverse direction, N, not less than
EPM 600 / 600 (polyester)
Temperature of flexibility on the beam R = 25 mm and R = 10 mm, °C, not higher
EPM –25
Heat resistance, °С, not lower
EPM 100
EKN Code
EPM 000107
Storage and installation method

Scope

Designed for the installation of hydro and gas insulation of underground parts of buildings and structures, as well as a vapor barrier layer in buildings with high humidity in the interior. The material protects the building and structures from the penetration of radioactive gases, in particular radon, into the interior through the basement. When installing underground waterproofing, the material is laid in the outer (facing the ground) layer in a multilayer (most often two-layer) waterproofing membrane. The material is laid by welding.

Mounting method

Fusion

Storage:

The rolls of material must be stored in a dry, closed room in a vertical position in one row in height at a distance of at least 1 m from heating devices.

Logistic parameters

Transportation:

Transportation is carried out by all types of transport in covered vehicles in accordance with the Rules for the carriage of goods in force for this type of transport. EKN

Packaging details:

Package of a pallet with rolls - a shrinkable white bag.

Parameter name Unit Edit Criterion EPP
Mass kg/m2 ±0.25 4.99
Thickness mm ±0.1 4.0
Tensile Breaking Strength: along N at least 600
across at least 400
Amount of binder on the welding side kg/m2 at least 2.0
24h water absorption % by weight no more 1
Temperature of flexure on the beam R=25 mm °С not higher -20
Waterproof at a pressure of at least 0.2 MPa for 2 hours - - absolute
Heat resistance °С at least 100
Length x Width m (±0.1) x (±0.01) 10x1
Protection Type top - - film without logo
bottom - - film with logo

*Conventional designation of the reinforcing bases (the first letter of the designation): E - polyester; T - fiberglass; X - fiberglass

Scope

Designed for the installation of hydro and gas insulation of underground parts of buildings and structures, as well as a vapor barrier layer in buildings with high humidity in the interior. The material protects the building and structures from the penetration of radioactive gases, in particular radon, into the interior through the basement. When installing underground waterproofing, the material is laid in the outer (facing the ground) layer in a multilayer (most often two-layer) waterproofing membrane. The material is laid by welding.

Mounting method

Fusion

Storage:

The rolls of material must be stored in a dry, closed room in a vertical position in one row in height at a distance of at least 1 m from heating devices.

Transportation:

Transportation is carried out by all types of transport in covered vehicles in accordance with the Rules for the carriage of goods in force for this type of transport. EKN

Packaging details:

Package of a pallet with rolls - a shrinkable white bag.