TECHNOELAST FOUNDATION FIX

Technoelast FOUNDATION FIXis a bitumen-containing roll waterproofing material.

Technoelast FOUNDATION FIX is obtained by double-sided application of a bitumen-polymer binder consisting of bitumen, SBS (styrene-butadiene-styrene) polymer modifier and mineral filler on a polyester base. Coarse-fraction sand from below and a polymer coating from above are used as protective layers.

Reviews ¹

Materials laid as a bottom layer

Materials laid as a top layer

Flexibility on the timber: -25 ° С

Warranty certificate

Waterproof 0.2 MPa

Durability - over 80 years

Package appearance:

Upper side:

Membrane with logo

Down side:

Fine-grained dressing

Physical and mechanical characteristics

Weight 1 m2, kg, (±0.25 kg)

EPM 4,0

Nail shank tear resistance, H, not less than

EPM 200

Breaking strength in the longitudinal / transverse direction, N, not less than

EPM 600 / 600 (polyester)

Temperature of flexibility on the beam R = 25 mm and R = 10 mm, °C, not higher

EPM –25

Heat resistance, °С, not lower

EPM 100

EKN Code

EPM 000107

Storage and installation method

Scope

Technoelast FOUNDATION FIX is intended for the installation of the lower layer of a multilayer waterproofing coating in foundations; underground and buried structures of buildings and structures; tunnels built in an open way; stylobates; parking lots, etc. The material is placed on a horizontal surface freely, with mechanical fixation on vertical surfaces. The second layer is completely built up over the first layer. Does not require priming of the base surface before laying the material. Technoelast FOUNDATION FIX material is interchangeable with Technoelast FIX material, without additional approval.

Mounting method

Fusion

Storage:

The rolls of material must be stored in a dry, closed room in a vertical position in one row in height at a distance of at least 1 m from heating appliances

Documentation

Technical lists TECHNOELAST FOUNDATION FIX

Logistic parameters

Transportation:

Transportation is carried out by all types of transport in covered vehicles in accordance with the Rules for the carriage of goods in force for this type of transport.

Packaging details:

Package of a pallet with rolls - a shrinkable white bag.

Equipment and complete assembling

Equipment and equipment

Parameter name		Unit Edit	Criterion	EPM
Mass		kg/m²	±5%**	4.0
Tensile Breaking Strength:	along	N	± 200***	800
Tensile Breaking Strength:	across	N	± 200***	800
24h water absorption		% by weight	no more	1
Flexibility temperature on the beam R=15 mm and R=25 mm		°С	not higher	-25
Waterproof at a pressure of at least 0.2 MPa for 2 hours		-	-	holds
Stud tear resistance nail, lengthwise/across		N	±20%	200/-
Heat resistance		°С	at least	100
Length x Width		m	(±1%) x (±3%)	10x1
Protection Type	top	-	-	film with logo
Protection Type	bottom	-	-	fine topping

*Conventional designation of the reinforcing bases (the first letter of the designation): E - polyester; T - fiberglass; X - fiberglass.
** Deviations in mass per unit area of more than +5% but not more than +10% are allowed.
*** Allowed deviations in maximum tensile force, along / across, more than +200 N.