enru

TECHNOELAST FOUNDATION HYDRO

Technoelast FOUNDATION HYDRO is a bitumen-containing roll waterproofing material.

Technoelast FOUNDATION HYDRO is obtained by double-sided application of a bitumen-polymer binder consisting of bitumen, SBS (styrene-butadiene-styrene) polymer modifier and mineral filler on a polyester base. Fine-grained dressing is used as the upper protective layer. From below, the material is protected by a fusible polymer film with a TechnoNICOL indicator pattern.

The material Technoelast HYDRO is interchangeable with the material TECHNOELASTMOST B, without additional approval.

Reviews 1

Materials laid as a bottom layer
Materials laid as a top layer
Flexibility on the timber: -25 ° С
Warranty certificate
Waterproof 0.2 MPa
Durability - over 80 years
Package appearance:
Upper side:
Fine-grained dressing
Down side:
Membrane with logo
Physical and mechanical characteristics
Weight 1 m2, kg, (±0.25 kg)
EPM 4,0
Nail shank tear resistance, H, not less than
EPM 200
Breaking strength in the longitudinal / transverse direction, N, not less than
EPM 600 / 600 (polyester)
Temperature of flexibility on the beam R = 25 mm and R = 10 mm, °C, not higher
EPM –25
Heat resistance, °С, not lower
EPM 100
EKN Code
EPM 000107
Storage and installation method

Scope

The material is intended for the installation of a single-layer and multi-layer waterproofing membrane in foundations; underground and buried structures of buildings and structures; tunnels; stylobates; parking lots, etc. The laying of the material is carried out by the method of full fusing on the prepared base or on the bitumen-containing material laid below.

Mounting method

Fusion

Storage:

The rolls of material must be stored in a dry, closed room in a vertical position in one row in height at a distance of at least 1 m from heating devices.

Documentation Logistic parameters

Transportation:

Transportation is carried out by all types of transport in covered vehicles in accordance with the Rules for the carriage of goods in force for this type of transport. EKN

Packaging details:

Package of a pallet with rolls - a shrinkable white bag.

Parameter name Unit Edit Criterion EMF
Mass kg/m2 ±5%** 6,3
Thickness mm ±0.1 5,1
Tensile Breaking Strength: along N ± 200*** 800
across ± 200*** 800
Amount of binder on the welding side kg/m2 at least 2.0
24h water absorption % by weight no more 1
Flexibility temperature on the beam R=15 mm and R=25 mm °С not higher -25
Waterproof at 10 kPa - - holds
Waterproof at a pressure of at least 0.2 MPa for 2 hours - - holds
Dynamic shear strength mm at least 2000
Static shear strength kg at least 20
Heat resistance °С at least 100
Length x Width m (±1%) x (±3%) 8x1
Protection Type top - - fine-grained topping
bottom - - film with logo

*Symbol designation of the reinforcing bases (the first letter of the designation): E - polyester.
** Deviations in mass per unit area of ​​more than +5%, but not more than +10% are allowed.
*** Allowed deviations in maximum tensile force, along / across, more than +200 N.

Scope

The material is intended for the installation of a single-layer and multi-layer waterproofing membrane in foundations; underground and buried structures of buildings and structures; tunnels; stylobates; parking lots, etc. The laying of the material is carried out by the method of full fusing on the prepared base or on the bitumen-containing material laid below.

Mounting method

Fusion

Storage:

The rolls of material must be stored in a dry, closed room in a vertical position in one row in height at a distance of at least 1 m from heating devices.

Transportation:

Transportation is carried out by all types of transport in covered vehicles in accordance with the Rules for the carriage of goods in force for this type of transport. EKN

Packaging details:

Package of a pallet with rolls - a shrinkable white bag.