enru

TECHNOELAST FOUNDATION

Technoelast FOUNDATION is a bitumen-containing roll waterproofing material.

Technoelast FOUNDATION is obtained by double-sided application of a bitumen-polymer binder consisting of bitumen, SBS (styrene-butadiene-styrene) polymer modifier and mineral filler on a polyester base. Flammable polymer films are used as the upper and lower protective layers.

The Technoelast FOUNDATION material is interchangeable with the Technoelast EPP material, without additional approval.

Materials laid as a bottom layer
Materials laid as a top layer
Materials for the construction of foundations and self-leveling floors
Flexibility on the timber: -25 ° С
Warranty certificate
Waterproof 0.2 MPa
Durability - over 80 years
Package appearance:
Upper side:
Membrane
Down side:
Membrane with logo
Physical and mechanical characteristics
Weight 1 m2, kg, (±0.25 kg)
EPM 4,0
Nail shank tear resistance, H, not less than
EPM 200
Breaking strength in the longitudinal / transverse direction, N, not less than
EPM 600 / 600 (polyester)
Temperature of flexibility on the beam R = 25 mm and R = 10 mm, °C, not higher
EPM –25
Heat resistance, °С, not lower
EPM 100
EKN code
EPM 000107
Storage and installation method

Scope

The material is intended for the installation of a multilayer (most often two-layer) waterproofing membrane in foundations; underground and buried structures of buildings and structures; tunnels built in an open way; stylobates; parking lots, etc. The material is laid by fusing on a prepared base or on a bituminous material laid below.

Mounting method

Fusion

Storage:

The rolls of material must be stored in a dry, enclosed area in a vertical position in one row in height at a distance of at least 1 m from heating devices.

Documentation Logistic parameters

Transportation:

Transportation is carried out by all modes of transport in covered vehicles in accordance with

Rules for the carriage of goods in force on this type of transport. EKN 691729.

Packaging details:

Package of a pallet with rolls - a shrinkable white bag.

Parameter name Unit Edit Criterion EPP
Mass kg/m2 ±5%** 5.0
Max Stretching Force: along N ± 200*** 800
across ± 200*** 600
Amount of binder on the welding side kg/m2 at least 2.0
24h water absorption % by weight no more 1
Flexibility temperature on the beam R=15 mm and R=25 mm °С not higher -25
Waterproof at 10 kPa - - holds
Pressure water resistance 0.2 MPa for 2 h - - holds
Resistance to dynamic punching mm at least 2000
Static shear strength kg at least 20
Heat resistance °С at least 100
Length x Width m (±1%) x (±3%) 10x1
Protection Type top - - film without logo
bottom - - film with logo

Scope

The material is intended for the installation of a multilayer (most often two-layer) waterproofing membrane in foundations; underground and buried structures of buildings and structures; tunnels built in an open way; stylobates; parking lots, etc. The material is laid by fusing on a prepared base or on a bituminous material laid below.

Mounting method

Fusion

Storage:

The rolls of material must be stored in a dry, enclosed area in a vertical position in one row in height at a distance of at least 1 m from heating devices.

Transportation:

Transportation is carried out by all modes of transport in covered vehicles in accordance with

Rules for the carriage of goods in force on this type of transport. EKN 691729.

Packaging details:

Package of a pallet with rolls - a shrinkable white bag.