enru

BIKROELAST

Bikroelast is a rolled roofing material.

Bikroelast is obtained by double-sided application of a bituminous binder, consisting of bitumen, filler and technological additives, onto a fiberglass (fiberglass, fiberglass) or polyester base, followed by applying protective layers on both sides of the canvas. Coarse-grained (shale), fine-grained (sand) dressing and polymer film are used as protective layers. Depending on the type of protective layers and the area of ​​application, Bikroelast is produced in the following grades:

  • Bikroelast K - with coarse-grained dressing on the front side and polymer film on the overlaid side of the web; it is used for the device of the upper layer of roofing carpet.
  • Bikroelast P - with fine-grained dressing or polymer film on the front side of the canvas and polymer film on the lower side of the canvas or fine-grained dressing on both sides of the canvas; it is used for the installation of the lower layers of roofing carpet.
Roofing materials
Materials laid as a bottom layer
Materials laid as a top layer
Standart class
Flexibility on the timber: -10 ° С
Service life: 10-15 years old
Package appearance:
Upper side:
Green
Gray
Red
Down side:
Membrane with logo
Physical and mechanical characteristics
Storage and installation method

Scope

Designed for installation and repair of the roof in two layers. Materials based on polyester (EKP, EPP) and fiberglass (HKP, KhPP) basis can be used when installing a new roofing carpet only with materials of the TPP and TKP brands, respectively.

Storage

Rolls of material should be stored in a dry closed room in a vertical position in one row in height at a distance of at least 1 m from the heaters.

Installation method

Fusion

Documentation Logistic parameters
Parameter name EKP TCH HKP EPG CCI HPP
Pallet packing White shrink bag
Weight 1 m2, kg 4.0 4.0 4.0 3.0 3.0 3.0
Roll area, m2 10 10 10 15 15 15
Roll weight, kg 40 40 40 45 45 45
Number of rolls per pallet, pcs. 20 25 25 23 23 23
Pallet size, mm 1000 × 1200 1000 × 1200 1000 × 1200 1000 × 1200 1000 × 1200 1000 × 1200
Pallet weight, kg 1030 1030 1030 1065 1065 1065
Equipment and complete assembling
Parameter name Unit rev. EKP TCH HKP EPG CCI HPP
Mass of 1 m2, kg, (± 0.25 kg) kg 4.0 2.5
Tensile breaking strength, not less along N 343 700 294 343 700 294
across - 700 - - 700 -
Mass of binder from the side to be welded, not less kg / m2 1.5
Water absorption within 24 hours, no more % by mass 1
Loss of sprinkling, no more g / arr. -
Flexibility temperature on the bar R = 25 mm, not higher ° С - 10
Water resistance at a pressure of not less than 0.001 MPa, for 72 hours - absolute -
Water resistance at a pressure of not less than 0.2 MPa, for 2 hours - - absolute
Heat resistance, not less ° С 85
Type of sheeting top - shale film without logo
bottom - film with logo
Length / width, m m 10x1 15x1
Water absorption within 24 hours, no more % by mass 006274 003726 007287 000032 001787 000030

Scope

Designed for installation and repair of the roof in two layers. Materials based on polyester (EKP, EPP) and fiberglass (HKP, KhPP) basis can be used when installing a new roofing carpet only with materials of the TPP and TKP brands, respectively.

Storage

Rolls of material should be stored in a dry closed room in a vertical position in one row in height at a distance of at least 1 m from the heaters.

Installation method

Fusion

Parameter name EKP TCH HKP EPG CCI HPP
Pallet packing White shrink bag
Weight 1 m2, kg 4.0 4.0 4.0 3.0 3.0 3.0
Roll area, m2 10 10 10 15 15 15
Roll weight, kg 40 40 40 45 45 45
Number of rolls per pallet, pcs. 20 25 25 23 23 23
Pallet size, mm 1000 × 1200 1000 × 1200 1000 × 1200 1000 × 1200 1000 × 1200 1000 × 1200
Pallet weight, kg 1030 1030 1030 1065 1065 1065