enru

TECHNOBARIER

Code EKN: 691611

TECHNOBARIER is a roll-up vapor barrier bitumen-containing material. The material is obtained by double-sided application to a fiberglass base, duplicated with a metal foil laminated with a polymer film, a bitumen-polymer binder, followed by applying protective layers on both sides of the canvas.

Due to the presence of metal foil, Technobarrier has a high resistance to vapor permeability.

Technobarrier is obtained by double-sided application of a bitumen-polymer binder to a fiberglass base, duplicated with a metal foil, followed by application of protective layers on both sides of the canvas. A fine-grained dressing is used as an upper protective layer on the front side, and a low-melting polymer film with an indicator pattern on the lower side.

Roofing materials
Vapor barrier material
Class: Premium
Flexibility on the timber: -20°С
Package appearance:
Upper side:
Fine-grained dressing
Down side:
Membrane with logo
Physical and mechanical characteristics
Storage and installation method

Scope

Technobarrier is intended for the device of vapor barrier in roof structures with a load-bearing base made of reinforced concrete in residential, public and industrial buildings with any humidity regime of the interior. The technical barrier can serve as temporary waterproofing on the roof.

Techno-barrier is laid loosely with the obligatory fusion of the seams with a gas burner (hot air dryer) or by continuous fusion on the prepared base.

According to the conclusion of VNIIPO, Technobarrier does not affect the definition of the fire hazard class of roof structures made on a reinforced concrete base, and can be used in the coatings of any buildings.

Installation method

Fusion

Storage:

Rolls of material should be stored in a dry, closed room in an upright position in one row in height at a distance of at least 1 m from heating devices.

Documentation Equipment and complete assembling
Parameter name Unit rev. Criteria Technobarrier Test Method
Designation * - - HFMP -
Mass 1 m2, (± 0.25) kg ± 5% 4.0 GOST EN 1849-1-2011
Maximum tensile force in longitudinal / transverse direction H ± 150 N 500/350 GOST 31899-1-2011
Elongation at maximum tensile force % ± 4 5/5 - || -
Flexibility on a bar R = 25 mm ⁰C not higher minus 20 GOST 2678-94
Water absorption within 24 hours, no more % by weight no more
1 GOST 2678-94
Water vapor permeability
mg / (mhPa)
± 20% 0.0000055 GOST 32318-2012
Equivalent air layer thickness by water vapor diffusion resistance, Sd
m
± 20%
1500 GOST 32318-2012
Waterproof for 24 hours at a pressure of 0.001 MPa - -
withstands GOST EN 1928-2011 (method A)
Width Length m ± 3% / ± 2% 1x10 GOST EN 1848-1-2011
Type of protective coating top - -
fine-grained dressing, easily removable -
bottom
Pallet packing - -
shrink -

* Conventional designation consistently characterizing the type of reinforcing base, protective coating from the front and bottom sides of the canvas: HF - fiberglass, duplicated with metal foil; M - fine-grained dressing; P - polymer film.

Scope

Technobarrier is intended for the device of vapor barrier in roof structures with a load-bearing base made of reinforced concrete in residential, public and industrial buildings with any humidity regime of the interior. The technical barrier can serve as temporary waterproofing on the roof.

Techno-barrier is laid loosely with the obligatory fusion of the seams with a gas burner (hot air dryer) or by continuous fusion on the prepared base.

According to the conclusion of VNIIPO, Technobarrier does not affect the definition of the fire hazard class of roof structures made on a reinforced concrete base, and can be used in the coatings of any buildings.

Installation method

Fusion

Storage:

Rolls of material should be stored in a dry, closed room in an upright position in one row in height at a distance of at least 1 m from heating devices.