TECHNOELAST BARRIER LIGHT
Technoelast BARRIER LIGHT is a self-adhesive waterproofing material for indoor use. It is a modification of Technoelast BARRIER (BO) material and has the same advantages: flexibility and elasticity. It differs from the analogue by the top coating, which is used as a non-woven fabric (spunbond), which allows laying ceramic tiles directly on the waterproofing. Technoelast BARRIER LIGHT material can be used in all climatic regions (according to SNiP 23-01-99 *).
Scope
Designed for waterproofing shallow foundations, waterproofing indoor spaces under a screed, vapor barrier of building structures. It is possible to use where it is forbidden to use an open flame, laying on combustible bases is possible; styling without additional equipment; laying in a confined, confined space.
Installation method
Self-adhesive
Storage:
Rolls of material should be stored in a dry, closed room in a vertical position in one row in height at a distance of at least 1 m from the heaters.
Certificate of Conformity GOST TECHNOELAST LIGHT
Declaration of Conformity TECHNOELAST LIGHT
| Parameter name | BARRIER LIGHT |
| Pallet packing | White Shrink Bag |
| Weight 1 m2, kg | 1,5 |
| Roll area, m2 | 20 |
| Roll weight, kg | 30 |
| Number of rolls per pallet, pcs. | 23 |
| Pallet size, mm | 1000 × 1200 |
| Pallet weight, kg | 720 |
| Parameter name | Unit rev. | Technoelast BARRIER LIGHT | |
| Mass 1 m2, (± 0.25) | kg | 1,5 | |
| Conditional Strength | MPa (kgf / cm2) | 1,0 (10) | |
| Bond strength, not less | with concrete | MPa (kgf / cm2) | 0.2 (2.0) |
| with metal | MPa (kgf / cm2) | 0.2 (2.0) | |
| Water absorption within 24 hours, no more | % by mass | 1 | |
| Flexibility temperature on the bar R = 25 mm, not higher | ° С | -25 | |
| Water resistance at a pressure not less than 0.06 MPa | - | absolute | |
| Binder softening point, not less | ° С | 90 | |
| Relative lengthening, not less | % | 60 | |
| Length / Width | m | 20x1 | |
| Shear strength of adhesive bond, not less | kN / m (kgf / cm) | 2 (2) | |
| Resistance to tearing of adhesive bond, not less | kN / m (kgf / cm) | 0.5 (0.5) | |
| Type of sheeting | top | - | polypropylene (Spunbond) |
| bottom | - | release film | |