TECHNOELAST FIX
The material of the lower layer of the roofing carpet is intended for mechanical fixation to the base. A protective layer of sand is applied to the material on the underside, which prevents the material from sticking to the surface. This allows wet screeds and concrete slabs to dry more efficiently. The material is made on a cross-reinforced polyester base, which excludes shrinkage and deformation of the material during the construction and operation of the roof.
Scope:
The material is intended for installation of mechanically fastened roofs, including on wet bases. It is also successfully used in the structures of combined roofs with mechanical fastening to steel corrugated board. The combination of mechanical fixing with the installation of roofing aerators allows not only to dry the base, but also prevents the accumulation of moisture in the insulation.
Storage
Store upright, away from sunlight.
Installation method
Mechanical fixation
Declaration of Conformity Technoelast FIX
Technical sheet Technoelast FIX
| Parameter name | EPM |
| Pallet packing | White Shrink Bag |
| Weight 1 m2, kg | 4.0 |
| Roll area, m2 | 10 |
| Roll weight, kg | 40 |
| Number of rolls per pallet, pcs. | 23 |
| Pallet size, mm | 1000 × 1200 |
| Pallet weight, kg | 950 |
| Parameter name | EPM |
| Mass of 1 m2, kg, (± 0.25 kg) | 4.0 |
| Resistance to tearing by nail shank, N, not less | 200 |
| Breaking force in longitudinal / transverse direction, N, not less | 600/600 (polyester) |
| Flexibility temperature on the timber R = 25 mm and R = 10 mm, ° С, not higher | –25 |
| Heat resistance, ° С, not less | 100 |
| EKN code | 000107 |