enru

TECHNOELAST FLEX

Technoelast FLEX is a baseless waterproofing bitumen-polymer SBS-modified material. The material is supplied in rolls of 500 mm width.

Technoelast FLEX is produced by applying a bitumen-polymer binder to a polymer film. A low-melting polymer film is used as the lower protective layer. Fine-grained sand is used as the upper protective layer. Used in the production of SBS - the modified mixture does not contain a filler, therefore it has high elasticity (more than 1000%) and low melt viscosity. This greatly simplifies the work with the material when constructing the formation seams.

Reviews 2

Class: Premium
Flexibility on the timber: -35 ° С
Warranty certificate
Validity term >60 year
Package appearance:
Upper side:
Sand
Down side:
Membrane with logo
Physical and mechanical characteristics
Storage and installation method

Scope

The material is used for insulation of foundations, underground and buried structures of buildings and structures, tunnels (under construction by open cut), stylobates, parking lots, etc. together with the deposited bitumen-polymer materials of the Technoelast brand. Together with cords PRP (rubber porous sealing gaskets, GOST 19177-81) forms a system of insulation of expansion joints.

Installation method

Fusion

Storage

Rolls of material should be stored in a dry closed room in their original packaging or unpacked in a vertical position in one row in height, at a distance of at least 1 m from the heaters. Outdoor storage is not allowed.

Documentation Equipment and complete assembling
Indicator name Unit rev. Criterion BMP
Mass 1 m2, (± 0.25) kg - 4.5
Thickness mm at least 4.5
Elongation to break, not less along N at least 1000
across at least 1100
24h Water Absorption % by mass no more 1
Brittleness temperature of binder ° С no more -35
Softening point, CuS ° С at least +110
Water resistance at a pressure of not less than 0.2 MPa, for 2 hours - at least absolute
Length / Width m 6x0.5
Type of sheeting top - sand
bottom - film
EKN code - - 590355/590356

Scope

The material is used for insulation of foundations, underground and buried structures of buildings and structures, tunnels (under construction by open cut), stylobates, parking lots, etc. together with the deposited bitumen-polymer materials of the Technoelast brand. Together with cords PRP (rubber porous sealing gaskets, GOST 19177-81) forms a system of insulation of expansion joints.

Installation method

Fusion

Storage

Rolls of material should be stored in a dry closed room in their original packaging or unpacked in a vertical position in one row in height, at a distance of at least 1 m from the heaters. Outdoor storage is not allowed.