TECHNOELAST TERRA
Single-layer bitumen-polymer SBS-modified waterproofing material. Possesses high resistance to static bursting and hydrostatic pressure. Reinforced base allows you to lay the material without gluing to the base on the horizontal part and with mechanical fastening on the vertical.
A fine-grained dressing is used as the upper protective layer, which protects the material from excessive heating and exposure to UV radiation during the production of work. The underside is covered with a low-melting polymer film. The overlaps of the panels can be fused with a gas burner or a hot air dryer.
Scope
The material is intended for the construction of a single-layer waterproofing membrane in foundations; underground and buried structures of buildings and structures; open cut tunnels; stylobates; parking lots, etc.
Installation method
Mechanical fixation / fusing
Storage:
Rolls of material should be stored in a dry closed room in a vertical position in one row in height at a distance of at least 1 m from the heaters.
Declaration of Conformity TECHNOELAST TERRA
Technical sheet TECHNOELAST TERRA
GOST Certificate of Conformity TECHNOELAST TERRA
Portfolio of objects using TECHNOELAST TERRA
Design and construction guide for Technoelast TERRA single-layer waterproofing membranes
| Parameter name | TERRA |
| Pallet packing | White Shrink Bag |
| Weight 1 m2, kg | 5.00 |
| Roll area, m2 | 10 |
| Roll weight, kg | 50 |
| Number of rolls per pallet, pcs. | 20 |
| Pallet size, mm | 1000 × 1200 |
| Pallet weight, kg | 1030 |
| Parameter name | Unit rev. | EMF | |
| Mass 1 m2, (± 0.25) | kg | 5.0 | |
| Mass of binder from the side to be welded, not less | kg / m2 | 2.0 | |
| Tensile breaking strength, not less | along | N | 1200 |
| across | 1100 | ||
| Water absorption within 24 hours, no more | % by mass | 1 | |
| Flexibility temperature on the bar R = 25 mm, not higher | ° С | -25 | |
| Water resistance at a pressure not less than 0.06 MPa | - | absolute | |
| Heat resistance, not less | ° С | 100 | |
| Length / Width | m | 10x1 | |
| Type of sheeting | top | - | sand |
| bottom | - | film with logo | |
| EKN code | - | 420522 | |