TECHNOELAST S

Technoelast S is a self-adhesive bitumen-polymer waterproofing roll roofing material. It is obtained by double-sided application of a bitumen-polymer binder to a polyester base, consisting of bitumen, a polymer modifier and a filler (talc, dolomite, etc.), followed by applying a self-adhesive layer on the underside of the canvas, consisting of bitumen, a polymer modifier and special adhesive additives ... Coarse or fine-grained dressing, anti-adhesive polymer film or paper are used as a protective layer.

Depending on the type of protective layer and the area of application, Technoelast S is produced in two grades:

Technoelast S EKS - with coarse-grained dressing on the front side and an anti-adhesive polymer film on the underside of the web; used for installing a single-layer roofing;
Technoelast S EMC - with fine-grained dressing on the front side and anti-adhesive polymer film on the underside of the web; It is used for the installation of the bottom layer of a two-layer roofing carpet.

Class: Premium

Flexibility on the timber: -25 ° С

Warranty certificate

Service life: 25-30 years old

Package appearance:

Upper side:

Slate

Sand

Down side:

Anti-adhesive membrane

Physical and mechanical characteristics

Mass of 1 m2, kg, (± 0.25 kg)

EMC 3.4

EKS 5.0

Breaking tensile strength, not less (along / across)

EMC 500/600

EKS 500/600

Water absorption within 24 hours, no more,% by weight

EMC 1

EKS 1

Flexibility temperature on a bar R = 25 mm and R = 10 mm, ° С, not higher

EMC -25

EKS -25

Heat resistance, ° С, not less

EMC 100

EKS 100

Water resistance at a pressure not less than 0.01 MPa

EMC -

EKS absolute

Water resistance at a pressure not less than 0.06 MPa

EMC absolute

EKS -

Loss of sprinkling *, no more, g / sample

EMC -

EKS 1

Length / width, m

EMC 15x1

EKS 10x1

Shear strength of adhesive bond, not less, kN / m

EMC 2.0

EKS 2.0

Tear resistance of adhesive bond, not less, kN / m

EMC 0.5

EKS 0.5

Type of sheeting

Top side

EMC sand

EKS slate

Guided side

EMC release film

EKS release film

Storage and installation method

Scope

Designed for the device of roofing carpet of buildings and structures. It is used where it is forbidden to use an open flame.

Installation method

Self-adhesive

Documentation

Technical sheet TECHNOELAST S

Certificate of Conformity GOST TECHNOELAST S

Declaration of Conformity TECHNOELAST S

Equipment and complete assembling

Parameter name		Unit rev.	EMC	EKS
Mass 1 m2, (± 0.25)		kg	3.4	5.0
Tensile breaking strength, not less	along	N	500	600
	across	N	300	400
Water absorption within 24 hours, no more		% by mass	1
Flexibility temperature on the bar R = 25 mm, not higher		° С	- 25
Water tightness at a pressure not less than 0.01 MPa		-	-	absolute
Water resistance at a pressure not less than 0.06 MPa		-	absolute	-
Heat resistance, not less		° С	100
Loss of sprinkling *, no more		g / sample	-	1
Length / Width		m	15x1	10x1
Bond strength, not less	with concrete	MPa	0.2
	with metal	MPa	0.2
Shear strength of adhesive bond, not less		kN / m	2.0
Resistance to tearing of adhesive bond, not less		kN / m	0.5
Type of sheeting	top	-	sand	slate
	bottom	-	release liner