UNIFLEX VENT
Uniflex VENT is a waterproofing deposited bitumen-polymer material for roofs. It is produced by double-sided application on a polyester base of a bitumen-polymer binder, consisting of bitumen, SBS (styrene-butadiene-styrene) polymer modifier and a mineral filler. As a protective layer, coarse-grained dressing (shale) or a polymer coating on top and a ventilated surface on the bottom are used. The ventilated surface has strips of bitumen-polymer binder, the space between which is filled with fine sand and the entire surface is covered with a thin polymer film.
Scope:
Designed for "breathing" roofs, with a strip glued to the base.
Storage
Rolls of material should be stored in a dry closed room in a vertical position in one row in height at a distance of at least 1 m from the heaters.
Installation method
Fusion
| Parameter name | EKP |
| Pallet packing | White Shrink Bag |
| Weight 1 m2, kg | 4.0 |
| Roll area, m2 | 10 |
| Roll weight, kg | 40 |
| Number of rolls per pallet, pcs. | 20 |
| Pallet size, mm | 1000 × 1200 |
| Pallet weight, kg | 830 |
| Parameter name | Unit rev. | EPV | EPV | |
| Mass 1 m2, (± 0.25) | kg | 4.0 | 5.5 | |
| Mass of binder from the side to be welded, not less | kg / m2 | 2.0 | ||
| Tensile breaking strength, not less | along | H | 700 | 700 |
| across | 550 | 550 | ||
| Water absorption within 24 hours, no more | % by mass | 1 | ||
| Flexibility temperature on the bar R = 25 mm, not higher | ° С | minus 20 | ||
| Water resistance at a pressure of not less than 0.001 MPa, for 72 hours | - | - | absolute | |
| Water resistance at a pressure of not less than 0.2 MPa, for 2 hours | - | absolute | - | |
| Heat resistance, not less | ° С | 100 | ||
| Loss of sprinkling *, no more | g / sample | - | 15 | |
| Length / width, m | m | 10x1 | ||
| Type of sheeting | top | - | film without logo | slate film |
| bottom | - | ventilated cover | ||
| EKN code | - | 000072 | ||