TN-Foundation SVG Solo
An insulation system for underground structures with a single-layer waterproofing membrane made of bitumen-polymer roll materials, erected in pits with a vertical fence (wall in the ground)
- Primer bituminous TECHNONICOL No. 01
- Waterproofing membrane Technoelast FOUNDATION TERRA
- Needle-punched geotextile TechnoNICOL 500 g / m2
- TechnoNICOL vapor barrier film 200 microns
- Swelling profile TECHNONICOL IC-SP 20x10
- Protective screed
- Baseless bitumen-polymer roll material Technoelast FLEX
- Technoelast FOUNDATION TERRA
A rolled bitumen-polymer material Technoelast FUNDAMENT TERRA is used as a waterproofing membrane, laid by continuous fusion in one layer, which is completely fused over a previously primed base.
A protective combination of layers of geotextile and polyethylene film protects the vertical waterproofing membrane from mechanical damage during installation and concrete work. In case of significant precipitation of the foundation, a layer of TECHNONICOL CARBON PROF extruded polystyrene foam is arranged between the waterproofing membrane and the geotextile to create an additional sliding layer.
System Features:
- one-layer waterproofing membrane with adhesion to the substrate;
- possibility of laying in a combined way - free laying on a horizontal surface and overlaying on a vertical one;
- laying bitumen-polymer roll materials without the use of specialized equipment.
The system is used to protect underground structures with exploited or residential premises, in local soils, regardless of the level of groundwater, erected in pits with vertical fencing.
A rolled bitumen-polymer material Technoelast FUNDAMENT TERRA is used as a waterproofing membrane, laid by continuous fusion in one layer, which is completely fused over a previously primed base.
A protective combination of layers of geotextile and polyethylene film protects the vertical waterproofing membrane from mechanical damage during installation and concrete work. In case of significant precipitation of the foundation, a layer of TECHNONICOL CARBON PROF extruded polystyrene foam is arranged between the waterproofing membrane and the geotextile to create an additional sliding layer.
System Features:
- one-layer waterproofing membrane with adhesion to the substrate;
- possibility of laying in a combined way - free laying on a horizontal surface and overlaying on a vertical one;
- laying bitumen-polymer roll materials without the use of specialized equipment.
