TN-ROOF Auto Layt

The system is used on the stylobate parts of the building and the roofs of modern multifunctional and residential complexes, where the roof is an exploited area, which implies the movement of vehicles and the arrangement of parking spaces.

Spreading plate with road surface is laid on a leveling layer of crushed stone with a fraction of 20-40 mm. Before laying the leveling layer of crushed stone between the waterproofing and the crushed stone, a separating layer of geotextile cloth with a weight of 500 g / m2 should be made. Before installing the distribution board, lay a geotextile cloth with a density of at least 300 g / m2 on the leveling sheet. If necessary, the leveling layer of crushed stone can be omitted in the solution.

High-tech and reliable material Technoelast EPP is used in the system for the installation of a waterproofing layer. Technoelast EPP material is laid in two layers on a prepared base made of reinforced cement-sand screed.

The main slope of the base under the waterproofing layer is made using expanded clay concrete.

Roofs of residential, administrative and public buildings, including the stylobate part. The system is compatible with the solutions TN-ROOF TROTUAR, TN-ROOF GREEN, TN-ROOF AUTO.

PRODUCTION OF WORKS ACCORDING TO:

• Instructions for installing a roofing made of bitumen-polymer materials on a reinforced concrete base;
• Guidelines for the design and installation of roofs made of bitumen-polymer materials;
• Guidelines for the design and construction of maintained and green roofs.

GUARANTEE:

• The warranty period for the watertightness of the TN-ROOF AUTO LITE system is 15 years.
• The guarantee for the water tightness of the systems is issued when all layers of the system specified in the technical sheet are used, and if all the recommendations of the Quality Service specialists are followed at the stage of installing the system.