TN-ROOF Auto
Roof system for vehicle load.
- Bitumen primer TECHNONICOL No. 01
- Technoelast EPP
- Extruded polystyrene foam TECHNONICOL CARBON SOLID 500
- TechnoNICOL polyethylene film
- Distribution reinforced concrete plate with a thickness of at least 100mm
- Two layers of asphalt concrete
- Slope-forming layer of expanded clay concrete
- Reinforced cement-sand screed with a thickness of at least 50mm
The TN-ROOF Auto inversion system uses high-tech, reliable hydro and thermal insulation materials Technoelast and TECHNONICOL CARBON SOLID500, resistant to high physical and mechanical stress.
The slope-forming layer is made of expanded clay concrete. To protect the heat-insulating material from the ingress of cement laitance and create a sliding layer over the insulation, it is necessary to provide a separating layer made of a polymer film, on top of which a distribution reinforced concrete slab is arranged, followed by laying asphalt concrete.
The system has high protection of the waterproofing carpet from mechanical damage and UV radiation due to the use of a distribution reinforced concrete slab and two layers of asphalt concrete.
The TN-ROOF Auto system is used on the roofs of modern multifunctional complexes, where the roof is an exploited area, which implies the constant movement of vehicles, as well as the arrangement of parking spaces.
- Withstands heavy transport loads
- High protection of waterproofing materials against mechanical damage and UV radiation
- Good maintainability of the upper layers of the system
The TN-ROOF Auto inversion system uses high-tech, reliable hydro and thermal insulation materials Technoelast and TECHNONICOL CARBON SOLID500, resistant to high physical and mechanical stress.
The slope-forming layer is made of expanded clay concrete. To protect the heat-insulating material from the ingress of cement laitance and create a sliding layer over the insulation, it is necessary to provide a separating layer made of a polymer film, on top of which a distribution reinforced concrete slab is arranged, followed by laying asphalt concrete.
The system has high protection of the waterproofing carpet from mechanical damage and UV radiation due to the use of a distribution reinforced concrete slab and two layers of asphalt concrete.
