TN-ROOF Fix Kombi
System of an unexploited roof on steel profiled decking with combined insulation
- Technoelast FLAME STOP
- Telescopic fasteners TechnoNICOL
- Technoelast FIX
- LOGICPIR PROF F / F
- Thermal insulation boards LOGICPIR CXM / CXM SLOPE
- TECHNOROOF N PROF stone wool slabs
- Vapor barrier C (A500 or F1000)
- Galvanized steel profiled sheet
Alternative materials
* Uniflex EPP, Technoelast ALFA, Bipol EPP ->
Roofing carpet consists of two layers of bitumen-polymer material. The bottom layer of Technoelast FIX is attached to the base mechanically with TechnoNICOL telescopic fasteners. The upper layer of bitumen-polymer material Technoelast FLAME STOP (with increased fire-fighting characteristics - RP1, B2) is fused onto the lower layer of the roof. Due to the use of two-layer bitumen-polymer waterproofing, the system has high surface mechanical strength and reliability.
Non-combustible stone wool slabs TECHNOROOF N PROF with a thickness of at least 50 mm are used as the bottom layer of thermal insulation, which provides the system with high fire-fighting characteristics. Insulation based on rigid polyisocyanurate LOGICPIR PROF F / F is used as the top layer of thermal insulation, characterized by high thermal insulation characteristics and surface rigidity.
A set of stone wool products is used as materials for the formation of slopes and counter-slopes on the roof: LOGICPIR SLOPE.
An aluminized membrane Vapor Barrier C (A500 or F1000) is used as a vapor barrier along the profiled flooring, which has high vapor barrier properties (including in the place where the fasteners are installed), is resistant to mechanical stress and can withstand the weight of a person.
Roofs of administrative, public (multifunctional shopping centers, etc.), industrial and warehouse buildings without restrictions on the area of application and perceiving the pedestrian load from seasonal, routine (daily) inspections and maintenance of equipment on the roof (access to the roof more than one once a week). allows you to obtain a group of fire hazard roofing KP0 according to table 5.2 SP 17.13330.2017 and used on the roofs of large buildings.
Depending on the operating conditions, a certain brand of vapor barrier material can be selected:
- The CA 500 vapor barrier is used in buildings with dry and normal humidity conditions in the interior;
- The vapor barrier SF 1000 is used in buildings of all humidity modes of indoor spaces, including wet and wet.
Roofing carpet consists of two layers of bitumen-polymer material. The bottom layer of Technoelast FIX is attached to the base mechanically with TechnoNICOL telescopic fasteners. The upper layer of bitumen-polymer material Technoelast FLAME STOP (with increased fire-fighting characteristics - RP1, B2) is fused onto the lower layer of the roof. Due to the use of two-layer bitumen-polymer waterproofing, the system has high surface mechanical strength and reliability.
Non-combustible stone wool slabs TECHNOROOF N PROF with a thickness of at least 50 mm are used as the bottom layer of thermal insulation, which provides the system with high fire-fighting characteristics. Insulation based on rigid polyisocyanurate LOGICPIR PROF F / F is used as the top layer of thermal insulation, characterized by high thermal insulation characteristics and surface rigidity.
A set of stone wool products is used as materials for the formation of slopes and counter-slopes on the roof: LOGICPIR SLOPE.
An aluminized membrane Vapor Barrier C (A500 or F1000) is used as a vapor barrier along the profiled flooring, which has high vapor barrier properties (including in the place where the fasteners are installed), is resistant to mechanical stress and can withstand the weight of a person.
