TN-ROOF Fix Prof
System of non-operational roof on steel profiled decking with mechanical fixation of bitumen-polymer roofing carpet
- Technoelast FLAME STOP
- Technoelast FIX
- Telescopic fasteners TechnoNICOL
- TECHNOROOF V OPTIMA stone wool slabs
- TECHNOROOF IN EXTRA WEDGE
- TECHNOROOF PROF stone wool slabs
- Vapor barrier C (A500 or F1000)
- Profiled sheet
Roofing carpet consists of two layers of bitumen-polymer material. The bottom layer of Technoelast FIX is attached to the base mechanically with TechnoNICOL telescopic fasteners. The upper layer of bitumen-polymer material Technoelast FLAME STOP (with increased fire-fighting characteristics - RP1, B2) is fused onto the lower layer of the roof. Due to the use of two-layer bitumen-polymer waterproofing, the system has high surface mechanical strength and reliability.
Two series of TECHNOROOF stone wool slabs are used in the construction: TECHNOROOF V OPTIMA as the top heat-insulating layer and TECHNOROOF PROF - as the bottom layer. Slabs TECHNOROOF PROF and TECHNOROOF V OPTIMA have a high density, which ensures the perception and distribution of the load acting on the roof surface during regular maintenance of the equipment placed on it.
A set of stone wool products are used as materials for the formation of slopes and counter-slopes on the roof: TECHNOROOF V EXTRA WEDGE.
An aluminized membrane Vapor Barrier C (A500 or F1000) is used as a vapor barrier along the profiled flooring, which has high vapor barrier properties (including in the place where the fasteners are installed), is resistant to mechanical stress and can withstand the weight of a person.
Depending on the operating conditions, a certain brand of vapor barrier material can be selected:
- Steam barrier CA 500 is used in buildings with dry and normal humidity conditions of the interior;
- The vapor barrier SF 1000 is used in buildings of all humidity modes of indoor spaces, including wet and wet.
Roofs of administrative, public (multifunctional shopping centers, etc.), industrial and warehouse buildings without restrictions on the area of application and perceiving the pedestrian load from seasonal, routine (daily) inspections and maintenance of equipment on the roof (access to the roof more than one once a week).
Roofing carpet consists of two layers of bitumen-polymer material. The bottom layer of Technoelast FIX is attached to the base mechanically with TechnoNICOL telescopic fasteners. The upper layer of bitumen-polymer material Technoelast FLAME STOP (with increased fire-fighting characteristics - RP1, B2) is fused onto the lower layer of the roof. Due to the use of two-layer bitumen-polymer waterproofing, the system has high surface mechanical strength and reliability.
Two series of TECHNOROOF stone wool slabs are used in the construction: TECHNOROOF V OPTIMA as the top heat-insulating layer and TECHNOROOF PROF - as the bottom layer. Slabs TECHNOROOF PROF and TECHNOROOF V OPTIMA have a high density, which ensures the perception and distribution of the load acting on the roof surface during regular maintenance of the equipment placed on it.
A set of stone wool products are used as materials for the formation of slopes and counter-slopes on the roof: TECHNOROOF V EXTRA WEDGE.
An aluminized membrane Vapor Barrier C (A500 or F1000) is used as a vapor barrier along the profiled flooring, which has high vapor barrier properties (including in the place where the fasteners are installed), is resistant to mechanical stress and can withstand the weight of a person.
Depending on the operating conditions, a certain brand of vapor barrier material can be selected:
- Steam barrier CA 500 is used in buildings with dry and normal humidity conditions of the interior;
- The vapor barrier SF 1000 is used in buildings of all humidity modes of indoor spaces, including wet and wet.
