TN-ROOF Sidewalk
System of the device of an exploited roof for pedestrian traffic with a drainage layer. Class of constructive fire hazard K0 (45), fire resistance limit RE 90.
- Primer bituminous TECHNONICOL No. 01
- Technoelast EPP
- Needle-punched geotextileTechnoNICOL 300 g / m2
- Extruded polystyrene foam TECHNONICOL CARBON PROF 300
- PLANTER geo drainage membrane
- Ballast (gravel fraction 20-40mm)
- Cement-sand mixture
- Paving slabs
- Sloping layer of expanded clay gravel
- Reinforced cement-sand screed with a thickness of at least 50mm
A distinctive feature of the system is the inverted layout of the structural layers, as well as the use of paving slabs as a topcoat.
To increase adhesion, the surface must be primed with TECHNONICOL bituminous primer No. 01 before laying the waterproofing.
For maximum reliability and protection against leaks due to the fault of the human factor and poorly fused seams, waterproofing by fusing is performed in two layers of Technoelast EPP bitumen-polymer material.
To ensure reliable protection against heat loss, extruded polystyrene TECHNONICOL CARBON PROF 300, characterized by low water absorption, is used as a heat-insulating layer. It is recommended to lay the insulation boards in one layer of the required thickness, since the moisture between the layers of thermal insulation during freeze-thaw cycles can lead to deformation of the insulation.
In the TN-ROOF system, the pavement finish is paving slabs of any modifications used in the improvement of residential areas and characterized by high resistance to pedestrian loads.
Due to the location of the waterproofing and thermal insulation under the cement-sand screed, they are reliably protected from mechanical damage and ultraviolet radiation, and the structure acquires exceptional durability and reliability, including in the field of fire safety.
The TN-ROOF Pavement system was developed taking into account the requirements for pedestrian load and is used in the new roof construction of modern multifunctional complexes. The system is recommended for effective and aesthetic use of the roof area, for example, as an additional resting place.
- Protection of waterproofing materials from mechanical damage and ultraviolet radiation
- High resistance to pedestrian traffic
| Material | Благодарственные письма и отзывы (EN) |
| Testimonial from RC "Caspian Valley" Volgograd |
A distinctive feature of the system is the inverted layout of the structural layers, as well as the use of paving slabs as a topcoat.
To increase adhesion, the surface must be primed with TECHNONICOL bituminous primer No. 01 before laying the waterproofing.
For maximum reliability and protection against leaks due to the fault of the human factor and poorly fused seams, waterproofing by fusing is performed in two layers of Technoelast EPP bitumen-polymer material.
To ensure reliable protection against heat loss, extruded polystyrene TECHNONICOL CARBON PROF 300, characterized by low water absorption, is used as a heat-insulating layer. It is recommended to lay the insulation boards in one layer of the required thickness, since the moisture between the layers of thermal insulation during freeze-thaw cycles can lead to deformation of the insulation.
In the TN-ROOF system, the pavement finish is paving slabs of any modifications used in the improvement of residential areas and characterized by high resistance to pedestrian loads.
Due to the location of the waterproofing and thermal insulation under the cement-sand screed, they are reliably protected from mechanical damage and ultraviolet radiation, and the structure acquires exceptional durability and reliability, including in the field of fire safety.
