TN-ROOF Solid Prof
System of an unexploited roof on a reinforced concrete base with an adhesive method of fastening heat-insulating plates and a two-layer overlay roofing on a base made of heat-insulating panels "Sandwich TECHNONICOL Ts-XPS"
- Technoelast FLAME STOP
- Uniflex VENT EPV
- Polymeric primer TECHNONICOL No. 08 Quick-drying
- Extruded polystyrene foam Sandwich TECHNONICOL C-XPS
- TECHNONICOL PROFESSIONAL foam adhesive for expanded polystyrene
- Extruded polystyrene foam TECHNONICOL CARBON PROF SLOPE
- Extruded polystyrene foam TECHNONICOL CARBON PROF
- Technobarrier *
- Polymeric primer TECHNONICOL No. 08 Quick-drying Reinforced concrete base
Alternative materials
* Uniflex ExpressRoofing carpet consists of two layers of bitumen-polymer material. The system uses a two-layer "breathing" bitumen-polymer roofing carpet, which avoids the formation of blisters on its surface, due to the use of a special material Uniflex VENT EPV as a lower layer. The upper layer of bitumen-polymer material Technoelast FLAME STOP (with increased fire-fighting characteristics - RP1, B2) is fused onto the lower layer of the roof.
Thermal insulation boards made of extruded polystyrene TECHNONICOL CARBON PROF are used in the structure as a lower layer, and extruded expanded polystyrene Sandwich TECHNONICOL C-XPS as an upper thermal insulation layer. Thermal insulation boards are glued to the vapor barrier layer and to each other on TECHNONICOL PROFESSIONAL foam adhesive for expanded polystyrene. Heat-insulating panels "Sandwich TECHNONICOL Z-XPS" are panels made of extruded polystyrene foam, covered with a protective layer of high-strength cement screed. The presence of a protective layer of high-strength cement screed eliminates the need to arrange a prefabricated or cement-sand screed, greatly simplifying installation and providing excellent operational properties.
If it is necessary to perform main and counter slopes on the roof, use XPS TECHNONICOL CARBON PROF SLOPE thermal insulation boards.
As a vapor barrier on a concrete base, the deposited material Technobarrier is used. The technical barrier reliably protects the roofing cake from steam saturation, while being resistant to possible mechanical damage during installation. The flexibility of the material up to minus 20 ° C makes it possible to create a vapor barrier at negative temperatures.
Roofs of residential, administrative, public and industrial buildings without restrictions on the area of application.
PRODUCTION OF WORKS ACCORDING TO:
- Instructions for installing a roofing made of bitumen-polymer materials on a reinforced concrete base;
- Guidelines for the design and installation of roofs made of bitumen-polymer materials.
Roofing carpet consists of two layers of bitumen-polymer material. The system uses a two-layer "breathing" bitumen-polymer roofing carpet, which avoids the formation of blisters on its surface, due to the use of a special material Uniflex VENT EPV as a lower layer. The upper layer of bitumen-polymer material Technoelast FLAME STOP (with increased fire-fighting characteristics - RP1, B2) is fused onto the lower layer of the roof.
Thermal insulation boards made of extruded polystyrene TECHNONICOL CARBON PROF are used in the structure as a lower layer, and extruded expanded polystyrene Sandwich TECHNONICOL C-XPS as an upper thermal insulation layer. Thermal insulation boards are glued to the vapor barrier layer and to each other on TECHNONICOL PROFESSIONAL foam adhesive for expanded polystyrene. Heat-insulating panels "Sandwich TECHNONICOL Z-XPS" are panels made of extruded polystyrene foam, covered with a protective layer of high-strength cement screed. The presence of a protective layer of high-strength cement screed eliminates the need to arrange a prefabricated or cement-sand screed, greatly simplifying installation and providing excellent operational properties.
If it is necessary to perform main and counter slopes on the roof, use XPS TECHNONICOL CARBON PROF SLOPE thermal insulation boards.
As a vapor barrier on a concrete base, the deposited material Technobarrier is used. The technical barrier reliably protects the roofing cake from steam saturation, while being resistant to possible mechanical damage during installation. The flexibility of the material up to minus 20 ° C makes it possible to create a vapor barrier at negative temperatures.
