TN-ROOF Standard KV
Unused roof system on concrete base.
- Technoelast FLAME STOP
- Uniflex VENT EPV
- Polymeric primer TECHNONICOL No. 08 Quick-drying
- Reinforced cement-sand screed with a thickness of at least 50 mm
- Slope-forming layer of expanded clay gravel
- Separating layer Roofing material
- Mineral wool insulation TECHNOROOF N PROF *
- Technobarrier **
- Reinforced concrete base
Alternative materials
* TECHNOROOF N OPTIMA
** Uniflex EPP | Technoelast ALFA | Bipole EPP
Roofing carpet consists of two layers of bitumen-polymer material. The system uses a two-layer "breathing" bitumen-polymer roofing carpet, which avoids the formation of blisters on its surface, due to the use of a special material Uniflex VENT EPV as a lower layer. The upper layer of bitumen-polymer material Technoelast FLAME STOP (with increased fire-fighting characteristics - RP1, B2) is fused onto the lower layer of the roof.
The mechanical strength and reliability of the system is due to the reinforced screed, which is arranged over the slope-forming layer of expanded clay.
Non-combustible stone wool insulation TECHNOROOF N PROF is used as thermal insulation in the system, which makes it possible to use the system when installing roofs of buildings with any class of functional fire hazard, including F1.1.
As a vapor barrier on a concrete base, the deposited material Technobarrier is used. The technical barrier reliably protects the roofing cake from steam saturation, while being resistant to possible mechanical damage during installation. The flexibility of the material up to minus 20 ° C makes it possible to create a vapor barrier at negative temperatures.
Roofs of residential, administrative, public and industrial buildings without restrictions on: STO 72746455-4.1.1-2020 Insulation systems. Roofs with waterproofing carpet made of rolled bitumen-polymer and polymer materials. Technical description. Requirements for design, materials, products and structures; - Guidelines for the design and installation of roofs made of bitumen-polymer materials.
Roofing carpet consists of two layers of bitumen-polymer material. The system uses a two-layer "breathing" bitumen-polymer roofing carpet, which avoids the formation of blisters on its surface, due to the use of a special material Uniflex VENT EPV as a lower layer. The upper layer of bitumen-polymer material Technoelast FLAME STOP (with increased fire-fighting characteristics - RP1, B2) is fused onto the lower layer of the roof.
The mechanical strength and reliability of the system is due to the reinforced screed, which is arranged over the slope-forming layer of expanded clay.
Non-combustible stone wool insulation TECHNOROOF N PROF is used as thermal insulation in the system, which makes it possible to use the system when installing roofs of buildings with any class of functional fire hazard, including F1.1.
As a vapor barrier on a concrete base, the deposited material Technobarrier is used. The technical barrier reliably protects the roofing cake from steam saturation, while being resistant to possible mechanical damage during installation. The flexibility of the material up to minus 20 ° C makes it possible to create a vapor barrier at negative temperatures.
