TN-ROOF Standard
Unused roof system on concrete base.
- Bipol
- Extruded polystyrene foam TECHNONICOL CARBON PROF 300
- Bitumen primer TECHNONICOL No. 01
- Uniflex VENT EPV
- Technoelast EKP
- Expanded clay slope-forming layer
- Reinforced cement-sand screed with a thickness of at least 50mm
As a vapor barrier on a concrete base, the deposited material Bipol EPP is used. The EPP bipole reliably protects the roofing cake from steam saturation, while being resistant to possible mechanical damage during installation. The flexibility of the material down to -15 ° C makes it possible to create a vapor barrier at low temperatures.
Mechanical strength and reliability of the TN-ROOF System Standard is due to the reinforced screed, which is arranged over the slope-forming layer of expanded clay.
In the TN-ROOFING Standard system, extruded expanded polystyrene TECHNONICOL CARBON PROF 300 is used as thermal insulation, which has low water absorption and high compressive strength.
The system uses a two-layer "breathing" bitumen-polymer roofing carpet, which avoids the formation of blisters on its surface, due to the use of a special material Uniflex VENT EPV as a lower layer.
TN-ROOF system The standard is used for roofing at industrial and public facilities with reinforced concrete bearing structures. The construction of the system is carried out according to the traditional scheme of laying the roofing cake, which has proven itself since the time of the use of roofing felt waterproofing.
- Preventing the formation of blisters on the roof
- Technology awareness
| Material | Благодарственные письма и отзывы (EN) |
| TECHNOELAST | Feedback from ASK Novosibirsk LLC (08/13/2019) |
As a vapor barrier on a concrete base, the deposited material Bipol EPP is used. The EPP bipole reliably protects the roofing cake from steam saturation, while being resistant to possible mechanical damage during installation. The flexibility of the material down to -15 ° C makes it possible to create a vapor barrier at low temperatures.
Mechanical strength and reliability of the TN-ROOF System Standard is due to the reinforced screed, which is arranged over the slope-forming layer of expanded clay.
In the TN-ROOFING Standard system, extruded expanded polystyrene TECHNONICOL CARBON PROF 300 is used as thermal insulation, which has low water absorption and high compressive strength.
The system uses a two-layer "breathing" bitumen-polymer roofing carpet, which avoids the formation of blisters on its surface, due to the use of a special material Uniflex VENT EPV as a lower layer.
