TN-ROOF Titanium
Non-operational roof system on profiled decking with prefabricated screed
- Vapor barrier С (А500 or Ф1000)
- Mineral wool insulation TECHNOROOF 45
- Bitumen primer TECHNONICOL No. 01
- Uniflex VENT EPV
- Technoelast EKP
- Prefabricated screed from two layers of ACL, total thickness not less than 16mm
- Mineral wool insulation TECHNOROOF N30 WEDGE 4,2%
In this system, a vapor barrier self-adhesive material Vapor barrier C (A500 or F1000) is used as a vapor barrier layer, which, unlike traditional polymer films, has high vapor barrier properties (including in the place where fasteners are installed), is resistant to mechanical stress and can withstand the weight of the person.
Non-combustible stone wool TECHNOROOF 45 is used as thermal insulation in the structure. TECHNOROOF 45 material has sufficient compressive strength for laying over it a prefabricated screed made of ACL.
High surface strength of the system is achieved through the use of prefabricated screed from two layers of ACL in TN-ROOF Titanium. To increase the adhesion of the bitumen-polymer material to the surface and in order to prevent warping, the prefabricated screed sheets must be primed on all sides with TECHNONICOL bitumen primer No. 01.
The system uses a two-layer "breathing" bitumen-polymer roofing carpet, which avoids the formation of blisters on its surface, due to the use of a special material Uniflex VENT EPV as a lower layer.
System TN-ROOF Titanium is widely used on prefabricated buildings and structures.
- High rigidity of the base under the roof
- No wet processes
- Preventing the formation of blisters on the surface of the roof carpet
| Material | Благодарственные письма и отзывы (EN) |
| UNIFLEX VENT TECHNOELAST |
Feedback from LLC "Eyva" |
| UNIFLEX TECHNOELAST FLAME STOP |
Review from LLC "Roofing height" (11.08.2019) |
| TECHNOELAST | Review from LLC "Techcenter" |
In this system, a vapor barrier self-adhesive material Vapor barrier C (A500 or F1000) is used as a vapor barrier layer, which, unlike traditional polymer films, has high vapor barrier properties (including in the place where fasteners are installed), is resistant to mechanical stress and can withstand the weight of the person.
Non-combustible stone wool TECHNOROOF 45 is used as thermal insulation in the structure. TECHNOROOF 45 material has sufficient compressive strength for laying over it a prefabricated screed made of ACL.
High surface strength of the system is achieved through the use of prefabricated screed from two layers of ACL in TN-ROOF Titanium. To increase the adhesion of the bitumen-polymer material to the surface and in order to prevent warping, the prefabricated screed sheets must be primed on all sides with TECHNONICOL bitumen primer No. 01.
The system uses a two-layer "breathing" bitumen-polymer roofing carpet, which avoids the formation of blisters on its surface, due to the use of a special material Uniflex VENT EPV as a lower layer.
