TN-ROOF Universal
A non-operational roof system on a concrete base with a prefabricated screed and ramps made of extruded polystyrene foam.
- Bipol
- Extruded polystyrene foam TECHNONICOL CARBON PROF RF SLOPE
- Extruded polystyrene foam TECHNONICOL CARBON PROF 300
- Bitumen primer TECHNONICOL No. 01
- Uniflex VENT EPV
- Technoelast EKP
- Concrete screed
A feature of this system is a complex of materials, the installation of which is possible even at temperatures down to -15 ° C, as well as if a small amount of moisture gets into the roofing cake during installation.
As a vapor barrier on a concrete base, the deposited material Bipol EPP is used. The material reliably protects the roofing cake from steam saturation, while being resistant to possible mechanical damage during installation.
For the slope device (including in valleys), wedge-shaped plates made of extruded expanded polystyrene TECHNONICOL CARBON PROF RF SLOPE are used, the use of which can lighten the weight of the roof structure, save time for laying the entire system, and also create a slope on the roof without using " wet "processes, which is very important at low temperatures. The use of prefabricated screed from two sheets of ATsL in the system allows the installation of the system practically at any time of the year.
The system uses a two-layer "breathing" bitumen-polymer roofing carpet, which avoids the formation of blisters on its surface, due to the use of a special material Uniflex VENT EPV as a lower layer.
The TN-ROOF Universal System is effectively used when installing a roof at any time of the year at industrial, civil, residential and public facilities with reinforced concrete load-bearing structures.
| Material | Благодарственные письма и отзывы (EN) |
| UNIFLEX VENT | Review from IP Sivolozky |
| UNIFLEX VENT | Review from LLC "STROYBUSINESSRAZVITIE" (04/07/2020) |
A feature of this system is a complex of materials, the installation of which is possible even at temperatures down to -15 ° C, as well as if a small amount of moisture gets into the roofing cake during installation.
As a vapor barrier on a concrete base, the deposited material Bipol EPP is used. The material reliably protects the roofing cake from steam saturation, while being resistant to possible mechanical damage during installation.
For the slope device (including in valleys), wedge-shaped plates made of extruded expanded polystyrene TECHNONICOL CARBON PROF RF SLOPE are used, the use of which can lighten the weight of the roof structure, save time for laying the entire system, and also create a slope on the roof without using " wet "processes, which is very important at low temperatures. The use of prefabricated screed from two sheets of ATsL in the system allows the installation of the system practically at any time of the year.
The system uses a two-layer "breathing" bitumen-polymer roofing carpet, which avoids the formation of blisters on its surface, due to the use of a special material Uniflex VENT EPV as a lower layer.
