enru

TN-POL Barrier Light

Interfloor waterproofing system.

  1. Reinforced concrete floor slab
  2. Leveling screed
  3. Primer bitumen emulsion
  4. Technoelast BARRIER LIGHT
  5. Tile adhesive
  6. Floor covering (tiles)
Description

This system consists of a waterproofing membrane laid on a pre-primed base and finishing with tiles, which is laid directly on the waterproofing layer.

The waterproofing membrane in the insulation system is made of a self-adhesive bitumen-polymer material Technoelast BARRIER LIGHT, which allows it to be used without the use of special equipment.

The upper protective layer of Technoelast BARRIER LIGHT made of non-woven polypropylene Spanbond ensures that the tiles are laid directly on the material. This significantly increases the speed of work.

The base for laying the waterproofing membrane must be pre-treated with TechnoNICOL bituminous water-emulsion Primer No. 04, which increases the adhesion of the material to the base, does not contain solvents and is recommended for use in residential premises.

Application area

Insulation system TN-POL Barrier Light is used for waterproofing interfloor ceilings, in bathrooms, showers, as well as floors with possible penetration of sewage by laying tiles directly on the waterproofing membrane without using a protective c / p screed.

This system consists of a waterproofing membrane laid on a pre-primed base and finishing with tiles, which is laid directly on the waterproofing layer.

The waterproofing membrane in the insulation system is made of a self-adhesive bitumen-polymer material Technoelast BARRIER LIGHT, which allows it to be used without the use of special equipment.

The upper protective layer of Technoelast BARRIER LIGHT made of non-woven polypropylene Spanbond ensures that the tiles are laid directly on the material. This significantly increases the speed of work.

The base for laying the waterproofing membrane must be pre-treated with TechnoNICOL bituminous water-emulsion Primer No. 04, which increases the adhesion of the material to the base, does not contain solvents and is recommended for use in residential premises.

Insulation system TN-POL Barrier Light is used for waterproofing interfloor ceilings, in bathrooms, showers, as well as floors with possible penetration of sewage by laying tiles directly on the waterproofing membrane without using a protective c / p screed.

Other systems
Whole catalog